FORMATION OF PHYSICO-MECHANICAL PROPERTIES OF POLYMER-MINERAL COATING FOR LEATHERFINISHING
| UDC 675.046.8 | DOI: https://doi.org/10.31617/tr.knute.2020(34)08 | |
|
Anna BONDAREVA E-mail: Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її. ORCID ID: 0000-0002-3241-2726 |
Postgraduate student at the Department of Commodity Science and Customs Affairs Kyiv National University of Trade and Economics 19, Kyoto str., Kyiv, 02156, Ukraine |
|
|
Olena MOKROUSOVA E-mail: Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її. ORCID ID: 0000-0003-1943-8048 |
Doctor of Sciences (Technical), Professor at the Department of Commodity and Customs Affairs, Kyiv National University of Trade and Economics 19, Kyoto str., Kyiv, 02156, Ukraine |
FORMATION OF PHYSICO-MECHANICAL PROPERTIES OF POLYMER-MINERAL COATING FOR LEATHERFINISHING
Background. It is proposed to use coloured modified dispersions of montmorillonite to ensure high physical and mechanical properties of polymer films and to give intense colour to the leather finish coating. The introduction of modified mineral dispersions into the polymer matrix allows the polymer to be structured and provides improved physical and mechanical properties of the leather coating.The aim of article is to study the influence of coloured modified dispersions of montmorillonite on the physical and mechanical properties of polymer films in order to form polymer-mineral coating with a high level of resistance before usage.
Materials and methods. Acrylic polymer and coloured modified montmorillonite dispersions were used for the study. The physical and mechanical properties of the obtained polymer-mineral films were evaluated by the indices of the conditional modulus of elasticity, tensile strength, relative elongation at break points, swelling and content of water-bearing substances.
Results. The introduction of coloured modified dispersions of montmorillonite to the polymer corrects the quality of the leather finish coating. The study of the effect of coloured modified dispersions of montmorillonite on the physical and mechanical properties of polymer acrylic matrices indicates the structural and elastic changes of the polymer film indices at different loads and elongations. The effect of structuring of polymer films and changes in physical and mechanical properties are amplified at higher temperatures of the coating formation.
Conclusion. It was found that the introduction of coloured modified dispersions of montmorillonite into the acrylic film-forming agent contributes to the enhancement of the physical and mechanical properties of polymer films. The maximum level of film strength is achieved when 1.5–2.0 % of montmorillonite is lost from weight of polymer. It is shown that the structuring of the polymer is enhanced by the formation of the polymer-mineral coating at a temperature of 60 °C. The formation of physical and mechanical properties of polymer-mineral films for leather coating is caused by chemical interactions between the active centres of the mineral and the functional groups of azo dyes and polymer.
Keywords: polymer, montmorillonite, modification, coating, finish, leather, physical and mechanical properties, indices.
REFERENCES
1. Izovit, T., & Naumenko, I. (2015). Tendencii’ rozvytku ukrai’ns’kogo rynku vyrobnyctva shkiry [Trends in the development of the Ukrainian leather production market]. Legka promyslovist’ – Light industry, 4, 2-4 [in Ukrainian].
2. Winter, C., Borges, Agustini C., Elizabeth, M., Schultz, R., & Gutterres, M. (2017). Influence of pigment addition on the properties of Polymer films for leather finishing. Journal of the Society of Leather Technologists and Chemists. (Vol. 101), 2, 78-85 [in English].
3. Kas’jan, E. Je. (2019). Fizyko-himija polimernyh plivkoutvorjuvachiv dlja ozdoblennja shkiry [Physico-chemistry of polymer film formers for leather finishing]. Kyi’v: Osvita Ukrai’ny [in Ukrainian].
4. Kondratjuk, O. V., & Kas’jan, E. Je. (2017). Vlastyvosti modyfikovanyh polimernyh kompozycij dlja ozdoblennja shkir [Properties of modified polymer compositions for leather finishing]. Visnyk Hmel’nyc’kogo nacional’nogo universytetu – Bulletin of Khmelnytsky National University, 5 (253), 62-66 [in Ukrainian].
5. Ekologichno orijentovani tehnologii’ vyrobnyctva shkirjanyh ta hutrovyh materialiv dlja stvorennja konkurentospromozhnyh tovariv. Ch. 1. Ekologichno orijentovani tehnologii’ vyrobnyctva shkirjanyh ta hutrovyh materialiv [Ecologically oriented technologies of production of leather and fur materials for creation of competitive goods. Part 1. Ecologically oriented technologies of production of leather and fur materials]. (2011). A. G. Danylkovich (Ed.). Kyi’v: Feniks [in Ukrainian].
6. Kondratjuk, O. V., & Kas’jan, E. Je. (2017). Rozrobka skladiv pokryvnyh kompozycijdlja ozdoblennja natural’nyh shkir [Development of structure of covering compositions for finishing of genuine leathers]. Visnyk Hmel’nyc’kogo nacional’nogo universytetu – Bulletin of Khmelnytsky National University, 6, 255-262 [in Ukrainian].
7. Yılmaz, Onur, Cheaburu, Catalina N., Gülümser, Gürbüz, & Vasile, Cornelia. (2011). Rheological behaviour of acrylate/montmorillonite nanocomposite latexes and their application in leather finishing as binders. Progress in Organic Coatings. (Vol. 70). (Issue 1), (pp. 52-58) [in English].
8. Yılmaz, Onur. (2014). A hybrid polyacrylate/OMMT nanocomposite latex: Synthesis, characterization and its application as a coating binder. Progress in Organic Coatings. (Vol. 77), 1, 110-117 [in English].
9. Wang, Chunhua, Mu, Changdao, & Lin, Wei. (2018). Effect of Novel Synthetic Clay on the Property of Waterborne Polyurethane Leather Finishing Agent: Enhanced Thermal, Mechanical and UV-resistant Performance. Journal of the Society of Leather Technologists and Chemists, 3, 155-159 [in English].
10. Otroshko, V. A., Mokrousova, O. R., & Merezhko, N. V. (2016). Vzajemodija kolagenudermy z mineral’nymy ta polimernymy spolukamy [Interaction of dermal collagen with mineral and polymeric compounds]. Tehnologichnyj audyt ta rezervy vyrobnyctva – Technological audit and production reserves, 2/4 (28), 48-54 [in Ukrainian].
11. Mokrousova, O. R. (2011). Tehnologija otrymannja mineral’nyh pigmentnyh koncentrativ dlja shkirjanoi’ promyslovosti [The technology of obtaining mineral pigment concentrates for the leather industry]. Visnyk KNUTD – Bulletin of KNUTD, 3, 67-74 [in Ukrainian].
12. Danylkovych, A. G. (2016). Osnovni materialy i tehnologii’ vyrobnyctva shkiry [Basic materials and technologies of leather production]. Kyi’v: Feniks [in Ukrainian].
13. Mokrousova, O. R. (2011). Polifunkcional’ni materialy dlja ridynnogo ozdoblennja shkir. Vplyv modyfikuvannja montmorylonitu spolukamy Cr(III) na elektropoverhnevi ta strukturni vlastyvosti dyspersij [Multifunctional materials for liquid leather finishing. The influence of modification of montmorillonite by Cr (III) compounds on electro surface and structural properties of dispersions]. Visnyk KNUTD – Bulletin of KNUTD, 1, 84-93 [in Ukrainian].
14. Morkousova, O., Pleten, O., & Kasyan, E. (2010). Pigment concentrate with montmorillonite for leather coat finishing. M. Pawlowa, I. Frydrych (Eds.). Innovations in clothes and footwear, 391-396. Radom [in English].
15. Spravochnik kozhevnika: otdelka. Kontrol’ proizvodstva [Leatherworking Guide: Finish. Production control]. (1987). N. A. Balberova (Ed.). Moscow: Legprombytizdat [inRussian].
16. Danilkovich, A. G., & Chursin, V. I. (2014). Analiticheskij kontrol’ v proizvodstve kozhi i meha. Laboratornyj praktikum [Analytical control in the production of leather and fur. Laboratory practice]. Moscow: MGUDT [in Russian].
17. Mokrousova, O. R. (2010). Mineral’ni napovnjuvachi dlja shkir. Reologichni vlastyvosti ta dyspersnist’ i’h vodnyh suspenzij [Mineral fillers for leathers. Rheological properties and dispersion of its aqueous suspensions]. Visnyk KNUTD – Bulletin of KNUTD, 4, 256-264 [in Ukrainian].